Sub250 Whoopfly16 RTF Combo FPV Whoop RTF Drone Carbon Fiber Frame RC FPV Quadcopter Racing Drone Ultra-light Analog 1s 4IN1

Description

Sub250

highly recommends the new Whoopfly16 RTF Kit in 2023! It will be a brilliant choice for new FPV beginners to start flying. Comes with a Whoopfly16 Analog Elrs 2.4gHz FPV drone, MicroRadio Elrs 2.4gHz transmitter, and Goggles 01.

Whoopfly16 is an inverted pusher with a protective frame FPV drone. It combines the characteristics of a short wheelbase for smooth indoor flight and the protection ring has strong protection characteristics.

Sub250 MicroRadio Elrs 2.4gHz remote control with a maximum transmission power of 500mW, 8 channels of ultra-low latency, replaceable 18650 batteries, and support type-c charging.

The FPV Goggles 01 use dual antennas to receive picture signals at the same time, support card recording DVR, built-in 3.7V 2000mAh battery that can be used for up to 2.5 hours, support USB fast charging, and one-key search frequency point. The multi-function menu design makes the operation more convenient.

Note:
1. The drone default to the angle mode.  You can  connect betaflight configurator and install more mode！（2023.07.04）
2. Update: The drone has been bound to the radio's default factory settings！

Sub250 Whoopfly16 Analog Elrs 2.4G Tiny Whoop 75mm

Specifications:

Product name: Whoopfly16 Analog Elrs 2.4

Frame: WF16

Wheelbase size: 75mm

Flight control system: Redfox A1 F4 5A 4in1 1S AIO FC

MCU: STMF411

IMU: ICM42688-P

OSD: BetaFlight OSD w/AT7456E chip

ESC: Redfox A1 4IN1 5A ESC

VTX: VTX 5.8G 200mW

Lens: Caddx Ant eco

Propeller: Gemfan 1608-3

Antenna: 5.8g copper tube antenna 70mm

ELRS Version weight: 35.2g

Receiver: ELRS 2.4G (SPI)

SUB250 MICRORADIO ELRS 2.4G TRANSMITTER

Specifications

Product name: MicroRadio

Size：147*135*71mm (Not including antenna)

Weight：223g

Adapted Drone Type: Multirotor, Airplane

Frequency band：2.4GHz ISM

Input voltage：6.6-8.4V

Antenna interface： SMA

Power：100/250/500mW

Channel：8 channel

Charging interface： USB-C

Firmware upgrade： Support

Bluetooth joystick： Support

Note: Not including Remote Control's Battery

Sub250 Goggles 01

Specifications

Product name: Goggles 01

Resolution：800*480px

Size of screen: 4.3 inch

Size: 155mm*144mm*113mm

Built-in Batteries: 3.7v / 2000 mAh

Working Time: 2.5 hours

Weight: 314.6g

WHOOPFLY16 RTF KIT'S PACKAGE INCLUDES:

1 x Whoopfly16 Analog Elrs 2.4g FPV Drone

1 x MicroRadio

1 x Sub250 Goggles 01

1 x Sub-CW1 charger

2 x Sub250 530mAh 90C 1S batteries

4 x 1608-3 Propellers

1 x Phillips screwdriver

1 x L-type Allen screwdriver (1.5mm)

1 x Portable Storage Bag

Whoopfly16 RTF Basic Teaching

Open the bag

Take out the radio/ goggles /drone/ and batteries

Take out two 5.8g antennas and install them on the goggles

Mounting the single antenna on the radio

Long press the radio power button to power the radio first

Long press the goggles power button to power

Plug in the battery to power the drone

The batteries can be recharged via Sub250-CW1 charger

The drone has been bound to the radio's default factory settings

Just place all the levers at the top and the throttle at the bottom

Pull the leftmost lever down, and the drone is unlocked

The drone default to the angle mode. You can connect betaflight configurator install more mode

Short press the menu button of goggles to enter the one-click search mode

The goggles will automatically select best signal channel according to the signal strength

Wearing your goggles to start flying now!