2 in 1 Natural Gas Detector And Carbon Monoxide CO Detector, Combustible Gas Leak Detector Monitor For Co, Lng, Lpg, Methane

Three types of equipment. Please choose according to your needs.

Model 1 KR002

Feature:

【High Sensitivity Dual Sensor Design】Carbon Monoxide fire alarm is a Catalytic Combustion Method Sensor and the Electrochemical Carbon Monoxide Sensor; Protect yourself and your family from two deadly threats. When dangerous concentrations of Carbon Monoxide or Explosive gases are detected, notify you immediately to save your life in the first place.
【Easy To Use】Push/test button – Connect to power 90V-240V or 9V rechargeable battery(not included), The detector will display 3 minutes counting.
【LCD Digital Display】This display clearly shows levels of Gas that the unit has detected and stored– from 0 to 3000 ppm–and it updates every 9 seconds to indicate any sudden changes.
【Voice Alarm】When the concentration of Carbon Monoxide reaches 100PPM or the concentration of Combustible gas reaches 6%, the LCD screen begins to display the concentration value, and the red LED lights flash and emit a loud voice alarm mode — 85 decibel alarm.
【Easy Installation & Quality】Easy to mount on any wall or ceiling without an electrician;The detector has been rigorously tested and passed UL2034 safety certification, If you have any questions, Please contact us by E-mail, We will give you a SATISFACTORY SOLUTION.

Gas Detector Information

Plug-in Carbon Monoxide & Explosive Gas Detector is a smart combustible gas combo detector with sound prompt and 9V battery Backup,continuously dispalys of the gas concentration levels from 100PPM-999PPM(±50PPM)and will Voice alarm >85 dB when dangerous levels are reached.This detector is a great helper to detect the invisible Gas & CO in the air(such as Natural Gas,Propane,Methane,Liquefied Petroleum Gas,etc)and keep you and your family away from the threat.

9V Rechargeable battery or Regular battery backup for protection even during power outages.

Where should install the gas detectors

1.Please confirm the induced gas in heavier than air or lighter than air,the gas is heavier than air:LPG etc. the gas is lighter than air: Natural gas, marsh gas etc.
2.Chooseing the suitable position to install the Detector according to the gas specific gravity.Detecting the gas heavier thanair: Installation height from floor 12-40 in,semi-diameter to gas source<60 in. Detecting the gas lighter than air,Installation height from the celling 12-40 in,semi-diameter to gas source<60 in. 3.To avoid installing the detector close to the following sources of interference:Direct air flow from vents,fans,doors,windows,sources of steam,oil vapor etc.

Model 2 KR001

Features:

Human voice prompt.
High reliable catalytic combustion method.
Gas concentration displaying(PPM).
Power supply from AC 90V-240V or 9V rechargeable battery (Not included).
Intelligent microprocessor control.
Auto low battery warning.
Alarm memory function.
Auto detect sensor failure.

Specifications:

AV voltage: AV 9V-240V 50-60Hz
Battery voltage: 9V rechargeable battery
Working temperature: 0-50degC
Environment humility: 10%-95%
Alarm density: 2500PPM(plusmn1500PPM)
Alarm time: keep alarming after over 2500PPM
Product Size: 112 * 73 * 42mm / 4.0 * 2.8 * 1.6in
Product weight: 161g / 5.69oz
Package size: 11 * 5.5 * 14.5cm / 4.4 * 2.2 * 5.7in
Package weight: 202g / 7.11oz

NOTICE:

The gas detector is easy to be effected by the sharp pounding and shock in transit or installation, lead to not work.
This is a Combustible Gas Detector, can not detect the poisonous gas such as CO.
Scheduled maintenance: surface cleaning per month, specialist inspection per half year.
Do not use the detergent to clean the gas detector, this will damage the gas detector.
Do not spray any sprays such as air freshener, hair spray, etc.
This product is only used to reduce the accident, cannot make sure every time. Except use our detector in right way, pleasure pay more attention in your daily life and strengthen safety and security consciousness.

What is Included

1 * Gas Detector NO BATTERY
1 * Pack of Mounting Screws
1 * User Manual(English)

Model 3 EUKR

Specifications:

1.1: characteristics
1. Wall mount type: mounted on the wall suction
roof type: mounted under the ceiling
2. Power supply: AC220V
3. Static power consumption: < 1.3W
4. Alarm power consumption:< 1.7W
5. Operating environment: temperature:-10 C,
45 C:30 C, 90%
6. Alarm concentration: natural gas: 1025%LEL
liquefied petroleum gas: 1025%LEL city gas:
2~5%LEL
1.2: use scope to make reliable alarm to the
excessive concentration of flammable gases
such as natural gas, city gas, liquefied petroleum
gas, etc. It can be widely used in home, gas
station, coal mine and so on.

Certificaters