Description
- Charger included: N
- Battery Included: No
- High-concerned chemical: None
- Accessory Type: Battery Accessories
- Origin: Mainland China
- Certification: None
Wiring method:
B-: Connect the negative pole of the battery
B+: Connect to the positive pole of the battery
P-: charge and discharge negative pole
P+: charging and discharging positive pole
BMS Specifications:Lifepo4 1S 10A/15A
Charging voltage:N*3.65V
Wiring:Common Port
Discharge current:10A/15A
Charging current:10A/15A
Main circuit conduction internal resistance:≤15mΩ
Discharge overcurrent protection:23A/33A
Product Size:47*8.5*3.5mm
cable: /
Overcharge protection
Detection voltage:3.7V±0.025V
Detection delay:100±50MS
Release voltage:3.5±0.05V
Over-discharge voltage protection
Detection voltage:2.0±0.1V
Detection delay:100±50MS
Release voltage:2.4±0.1V
Self-consumption
Working power consumption:<5UA
Sleep over-discharge power consumption:<5UA
Working temperature range:-30°~+80°C




BMS Specifications:Lifepo4 2S 15A/20A/25A
Charging voltage:N*3.65V
Wiring:Common Port
Discharge current: 15A/20A/25A
Charging current: 15A/20A/25A
Main circuit conduction internal resistance:≤5mΩ
Discharge overcurrent protection: 65A/80A/90A
Product Size: 60*25*3.5mm
cable: /
Overcharge protection
Detection voltage:3.7V±0.025V
Detection delay:100±50MS
Release voltage:3.5±0.05V
Over-discharge voltage protection
Detection voltage:2.0±0.1V
Detection delay:100±50MS
Release voltage:2.4±0.1V
Self-consumption
Working power consumption:<10UA
Sleep over-discharge power consumption:<5UA
Working temperature range:-30°~+80°C





NOTE:LIfepo4 3S BMS has two voltage markings scheme.
Standard voltage markings are: 3.2V/6.4V/9.6V
Fully charged voltage mark: 3.7V/7.4V/11.1V
The LIfepo4 3S BMS we sell uses the full voltage marking scheme, so the standard on the BMS is: 3.7V/7.4V/11.1V.
It’s not that we sent the wrong BMS model: li-ion 3S BMS.
Of course, you can also test the BMS through the cut-off voltage of charge and discharge.
BMS Specifications:Lifepo4 3S 12A/15A/22A
Charging voltage:N*3.65V
Wiring:Common Port
Discharge current:12A/15A/22A
Charging current:6A/7A/11A
Main circuit conduction internal resistance:≤20mΩ
Discharge overcurrent protection:20A/40A/40A
Product Size:56*45*3.5mm
cable: /
Overcharge protection
Detection voltage:3.75V±0.025V
Detection delay:100±50MS
Release voltage:3.55±0.05V
Over-discharge voltage protection
Detection voltage:2.15±0.1V
Detection delay:100±50MS
Release voltage:2.4±0.1V
Balanced voltage
Detection voltage:3.6V±0.025V
Detection delay:100±50MS
Balance current:36MA(maximum value)
Short circuit protection
Trigger condition:external short circuit
Detection delay:<300us
Release condition:disconnect the load
Disconnection protection
Trigger condition: Any set of battery cables is disconnected,cut off output and input
Release condition: restore the cable connection
Self-consumption
Working power consumption:<15UA
Sleep over-discharge power consumption:<10UA
Working temperature range:-30°~+80°C





BMS Specifications:lifepo4 4S 12V 10A/20A/30A
Charging voltage:N*3.65V
Wiring:Common Port
Discharge current:10A/20A/30A
Charging current:5A/10A/15A
Main circuit conduction internal resistance:≤15mΩ
Discharge overcurrent protection:20A/40A60A
Product Size:56*48*3.2mm
cable: /
Overcharge protection
Detection voltage:3.65V±0.025V
Detection delay:1000±500MS
Release voltage:3.55±0.05V
Over-discharge voltage protection
Detection voltage:2.4±0.1V
Detection delay:1000±500MS
Release voltage:2.5±0.1V
Balanced voltage
Detection voltage:3.6±0.025V
Detection delay:100±50MS
Balance current:40MA(maximum value)
Short circuit protection
Trigger condition:external short circuit
Detection delay:<350us
Release condition:disconnect the load
disconnection protection
Trigger condition: Any set of battery cables is disconnected,cut off output and input
Release condition: restore the cable connection
Self-consumption
Working power consumption:<20UA
Sleep over-discharge power consumption:<10UA
Working temperature range:-30°~+80°C

































d***n (verified owner) –
Excellent shipping time, arrived earlier than expected. Good packaging.
P***k (verified owner) –
Work perfectly
h***r (verified owner) –
Everything perfect, fast delivery, gladly again.
e***t (verified owner) –
Everything fine and correct
I***i (verified owner) –
ok, excellent seller
AliExpress Shopper (verified owner) –
I have already used these BMS and they are very good, high quality, and work perfectly with LiFePo4 batteries. I have used them with 32700 and 26700 without any problems.
AliExpress Shopper (verified owner) –
It works perfectly i like it
S***k (verified owner) –
I used a board for 4 batteries up to 10A. Everything is fine. It’s already installed in the UPS. Everything works. It prevents the batteries from overcharging and over-discharging. Tested. Nothing gets hot. A very successful and well-thought-out design of the board. The contact pads are positioned so that the wires from the batteries don’t get tangled and are minimal in length. The main thing is to position it correctly during installation. Thank you.