Gigabyte B460M AORUS ELITE Motherboard B460 LGA 1200 DDR4 Support 10th Gen Core Mainboard

Description

Support for LGA1200 slot – 10th Generation processor:

Supports the 10th generation Intel® Core™ i9 processor /Intel® Core™ i7 processor /Intel® Core™ i5 processor /Intel® Core™ i3 processor /Intel® Pentium® processor /Intel® Celeron® Processor

The L3 cache depends on the CPU

Please visit the Gigabyte website to check the list of supported processors.

Chipset

Intel® B460 high-speed chipset

Memory

Intel® Core™ i9/i7 processors:

Supports DDR4 2933/2666/2400/2133 MHz memory sticks

Intel® Core™ i5/i3/Pentium®/Celeron® processors:

Supports DDR4 2666/2400/2133 MHz memory sticks

4 DDR4 DIMM slots, supporting up to 128 GB (a single slot supports 32 GB capacity)

Support dual-channel memory technology

Supports ECC Un-buffered DIMM 1Rx8/2Rx8 memory (operating in non-ECC mode)

Supports non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory

Support Extreme Memory Profile (XMP) memory

(Please check the Gigabyte website for the supported memory stick speeds and list.)

Display function

Based on a processor with display function – Supports Intel® HD Graphics:

1 DVI-D interface, supporting resolutions up to 1920×1200@60 Hz

This DVI-D interface does not support the function of converting to VGA.

1 DP interface, supporting resolutions up to 4096×2304@60 Hz

Supports DP 1.4 version, HDCP 2.3 and HDR.

1 HDMI port, supporting resolutions up to 4096×2160@30 Hz

Supports HDMI 1.4 version and HDCP 2.3.

It can support simultaneous output on up to three displays

Support * Shared display memory *512 MB

Sound effect

Integrated with Realtek® ALC1200 chip

Support High Definition Audio

Supports 2/4/5.1/7.1- channels

Network

Integrated Intel® GbE network chip (1000 Mbit/100 Mbit)

Expansion slot

One PCI-E x16 slot, supporting the x16 operating specification (PCIEX16)

To fully utilize the performance of the graphics card, it is essential to install the PCIEX16 slot when installing a graphics card.

One PCI-E x16 slot, supporting the x4 operating specification (PCIEX4)

One PCI-E x1 slot

(* All PCI-E slots support PCI Express 3.0)

One M.2 WIFI slot for the wireless communication module (M2_WIFI)

Support the ASPM L1.2 power management protocol

Storage device interface

One M.2 slot (supporting Socket 3, M key, type 2242/2260/2280/22110 PCIe x4/x2 SSD) (M2Q_SB)

One M.2 slot (supporting Socket 3, M key, type 2242/2260/2280 SATA and PCIe x4/x2SSD) (M2A_SB)

Six SATA 3.0 interfaces

Supports SATA RAID 0, RAID 1, RAID 5 and RAID 10 functions

For installation precautions of M.2/SATA slots, please refer to the instructions in the "1-7 Sockets and Patch Cords Introduction" section.

Intel® Optane™ Memory Ready

The M2Q_SB socket supports the Intel® Optane™ Memory system acceleration function.

Support the ASPM L1.2 PCI-E power management protocol

USB

Based on chipset:

One USB Type-C™ interface on the rear window IO supports USB 3.2 Gen 1

Five USB 3.2 Gen 1 interfaces (three are on the IO in the rear window, and two need to be connected from the USB socket inside the motherboard via a ribbon cable)

Two USB 2.0/1.1 interfaces are on the rear window IO

Based on chipset +USB 2.0 Hub:

The four USB 2.0/1.1 interfaces need to be connected from the USB sockets inside the motherboard via ribbon cables

Internal socket

One 24-pin power socket for the motherboard

One 8-pin CPU power socket

One CPU fan socket

Three system fan sockets

Two programmable LED light strip power sockets

Two RGB LED light strip power sockets

Six SATA 3.0 interfaces

Two M.2 SSD slots

One motherboard jumper socket

One front audio socket

One USB 3.2 Gen 1 socket

Two USB 2.0/1.1 sockets

Two Thunderbolt™ expansion sub-card sockets

1 socket for security encryption module (for use with GC-TPM2.0 SPI/GC-TPM2.0 SPI 2.0 only)

One COM socket

One clear CMOS data pin

One Q-Flash Plus button

The rear panel device is connected to the socket

One PS/2 keyboard/mouse interface

One DVI-D interface

One DP interface

One HDMI interface

One USB Type-C™ interface, supporting USB 3.2 Gen 1

Three USB 3.2 Gen 1 interfaces

Two USB 2.0/1.1 interfaces

One RJ-45 network cable interface

Six audio interfaces

I/O controller

Integrate the iTE® I/O control chip

Hardware monitoring

Voltage detection

Temperature detection

Fan speed detection

Over-temperature warning

Fan Failure warning

Intelligent fan control

Whether the intelligent fan control function is supported depends on different cooling fans.

BIOS

One 128 Mbit flash

Use the authorized AMI UEFI BIOS

PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0

Additional tool program

Support APP Center

The programs supported by APP Center may vary depending on different motherboards. The functions supported by each program will also vary according to the specifications of the motherboard. .

@BIOS

EasyTune

Fast Boot

Game Boost

ON/OFF Charge

RGB Fusion

Smart Backup

System Information Viewer

Support Q-Flash Plus

Support Q-Flash

Support Xpress Install

Bonus software

Norton® Internet Security (OEM Version)

cFosSpeed

Operating system

Support Windows 10 64-bit

PCB Specification

Micro ATX specification 24.4cm x 24.4cm

Remarks

As different chip manufacturers have different levels of support for Linux, it is recommended that you download the driver from the website of the chip manufacturer or other Linux websites.

This product does not support Win9X/ME/2000/XP. As some software/hardware manufacturers no longer provide subsequent support for Win9X/ME/2000/XP, in order to serve customers, our company still tries its best to provide relevant driver programs on the website