60W Self-Priming Pump Garden Watering Irrigation System Power Supply Timing 5-30M Drip Watering Kits for Plants Yard Greenhouse

• Direction for use: When a 60-watt pump operates at a pressure of 0.8 megapascals, its flow rate is approximately 5 liters per minute; for a 1/4-inch pipe, the flow rate is approximately 400 liters per hour; for drip irrigation Droper, the flow rate is approximately 0 – 80 liters per hour. Due to the limited water flow of the pump and the pipe, this irrigation system is not suitable for main pipelines with a diameter larger than 1/4 inch, a length exceeding 15 meters, and more than 10 sprinklers (each sprinkler has a flow rate of approximately 20 – 30 liters per hour). Recommendation: For systems of 15 – 30 meters, install 2 – 3 valves for batch irrigation (the number of sprinkler heads for each batch of drip irrigation pipes is less than 10).

• The product does not need to be connected to a faucet, it can be pumped from any container.

• This product can provide quite good vibration isolation effect.

• Material: Plastic

• Color: Same as picture

• Input Voltage: AC 110V -240V

• Output: 12V – 6A

• Pump Powder: 60W (we also attached 60w / 80w / 100w for your choose)

• Maximum water pressure: 0.8mpa

• Pump Flow (maximum): 5L / min

• Power Supply Included (except H)

Package including:

• 1 SET

Overview:

100% brand new and high quality;

Notes:
1.For irrigation systems ranging from 15 to 30 meters in length, it is not allowed to install more than 10 sprinklers using a 1/4-inch irrigation pipe. Instead, valves must be installed for batch irrigation.
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color which is showed on the pictures. Thank you!
2. Please forgive 1-3mm measuring deviation due to manual measurement.