800-1 4000RPM Laboratory Benchtop Centrifuge 1790xg Electric Centrifuge Machine with Timer and Speed Control 12mlx6 Tubes

Feature:

1. Main Purpose: The centrifuge is mainly used to separate suspension and liquid, or two liquids with different densities and mutual solubility in lotion.
2. Knob Operation: There are 2 rotating knobs on the control panel to help you easily control time and speed, and you can also set time and speed.
3. Working Range: The rotor capacity is 20ml x 6, with a speed range of 0‑4000rpm, making it an excellent choice for small volume sample separation.
4. With NO Timer: Equipped with a timer with a 0‑60 minute normally open timing range, fully automatic operation, which is efficient and practical.
5. Non Slip Pads: There are 3 non slip rubber pads at the bottom, which increase the friction between the table and the machine, provide good protection.
6. Applications: Widely used in scientific research, education, and production departments such as biology, chemistry, medicine, etc., suitable for radioimmunoassay monitoring and separation of cells and large particles.

Specification:

Item Type: Benchtop Centrifuge
Model: 800-1
Motor Power: 25W
Speed: 0-4000rpm
Rotor Capacity: 20mlx6
Timing Range: 0-60 Minutes, Normally Open
Maximum Centrifugal Force: 1790xg
Structure Type: Desktop
Layout: Vertical
Applicable Objects: Oil, grain, plastic, sand, soil
Structure And Separation Requirement: Separator
Application: Chemical, petroleum, pharmaceutical, medical, pharmaceutical
Use: Experimental Use
Automation: Fully Automatic

How to Use:

The centrifuge workbench should be flat and firm, the working room should be clean, dry and well ventilated, and the ambient temperature should be 5‑32°C. Open the centrifuge and wipe the inner cavity and rotor clean. Install the test tube with the same weight, close the centrifuge cover, adjust the speed control knob, and raise the required speed. Before each shutdown, the speed control knob must be set to the minimum position. Timer set zero power switch to cut off the power supply. Wipe the inner cavity and rotor and close the centrifuge cover.

Package List:

1 x Centrifuge Machine

1 x User Manual

Note:

It is strictly prohibited to run no load without a rotor; Before operation, the rotor should be checked for corrosion damage; Do not touch the running rotor while the rotor is running; It is strictly forbidden to run the rotor in the state of unbalanced loading.