Brushed Nickel Kitchen Faucet Single Hole Pull Out Spout Kitchen Sink Mixer Tap Stream Sprayer Head Chrome/Black Mixer Tap

Installation Instructions

Please note: These instructions are specifically for the tutorial installation method.

1. Unpack

   • Carefully unpack the product.

2. Cut the Rope from the Hose

   • Remove any packaging ropes from the hose.

3. Insert a Rubber Ring into All the Hoses

   • Ensure each hose has a rubber ring inserted.

4. Ensure the Rubber Ring is Under the Fixed Seat

   • Position the rubber ring so it sits under the fixed seat.

5. Thread All Hoses Through the Basin Retaining Holes

   • Pass each hose through the retaining holes in the basin.

6. Place the Remaining Rubber Ring and Metal Ring in Turn

   • Sequentially place the rest of the rubber ring and then the metal ring onto the hoses.

7. Ensure it Fits Under the Fixing Hole

   • Make sure the assembly fits snugly under the fixing hole.

8. Side-by-Side Hose Insert Nut

   • Insert the nut for the hoses side-by-side.

9. Tighten the Screws After Tightening the Nuts

   • Secure the assembly by tightening the screws after the nuts are tightened.

10. Attach the Weight Ball to the Black Hose

    • Bring the black hose together 10-15 cm up and attach the weight ball.

11. Note: The Weight Ball Should Be Stuck on This Side

    • Ensure the weight ball is correctly positioned and secured.

12. If the Water Inlet Ports Are Inconsistent, Replace the Fittings

    • Check the water inlet ports; if inconsistent, replace the fittings as needed.