Description
- High-concerned chemical: None
- Installation Method: Assembly
- Model Number: KO
- Surface Treatment: Brushed
- Sink Style: Single Bowl
- Feature: Without Faucet
- Installation Type: Above Counter
- Brand Name: BusySink
- Material: Stainless steel
- Bowl Shape: Rectangular
- Origin: Mainland China
- Certification: CE
- Number of Holes: Two
Note before buying:
1.Please confirm the amount of customs duties levied by your local customs on the products before purchasing. The buyer is required to bear the tariff. If you cannot accept it, please do not place an order, thank you!
2. Because the sink is a large package,Logistics method"Cainiao Heavy Parcel Line", It takes a long time to transport, and it is expected to be delivered within 35-50 days. Please patience wait.
3.Due to the shooting light and equipment is not the same, the physical colour and the colour of the details of the picture may have a little difference, is a normal phenomenon. Can accept before ordering, thank you!
Product Name: Sink
Product Material: Stainless steel
Size: 75x48x23CM /29.53×18.9×9.06 inch
68x48x23CM / 26.77×18.9×9.06 inch
80x48x23CM / 31.5×18.9×9.06 inch
Manufacturing Industry: Stainless Steel Sheet Integral Stretch Forming
Surface Technology: Soft Oiled Brushed Surace
Product Features: Large Capacity, No Dirt, Vertical Basin
Use: Can Wash Dishes, Fruits and Vegetables.
Product Features: Surface Wire Drawing Treatment, Stainless Steel Texture! Good Stability, Not Only No Glare, But Also Can Withstand Repeated Wear of Porcelain and Tableware, Easy to Clean.
Applicable Ocns: Can Be Used in Hotels, Restaurants, Families, Etc.



































AliExpress Shopper (verified owner) –
The fryer has a large texture and feels thick and touch-resistant. It is very resistant.
AliExpress Shopper (verified owner) –
Good 👍
AliExpress Shopper (verified owner) –
I am extremely satisfied.
I recommend it~~~
С***ч (verified owner) –
The sink is excellent. No seller of such sinks knows or provides important specifications: in this model (68/48 SUS304), the thickness of the bottom at the drain hole = 0.83 mm. And what they refer to as the “wall thickness” is actually the welding of two sheets, as can be seen in the photo.
The packaging is branded, but the bottom of the sink is not sufficiently protected. Even minor damage to the packaging during transportation can result in slight damage to the bottom and welded corners. They are corrected with a rubber hammer (trowel) – this is also visible in the photo. In addition to the specified set, a cutting board was included with one side made of metal and the other side made of plastic.