Description
- Hign-concerned Chemical: None
- Output Power: 201 – 300W
- is_customized: No
- Output Current: 0-10A
- Model Number: TPS305 TPS3010 TPS605 TPS1203
- Output Frequency: 50/60 HZ
- Brand Name: wanptek
- Output Type: SINGLE
- Origin: Mainland China
- Certification: CE,FCC
- Features1: Laboratory power supply
- Features2: DC Power Supply
- Features3: Bench power supply
- Features4: Adjustable power supply
- Features5: with USB-A/TYPE-C
- Features6: Short circuit alarm
- Features7: 30V 5A Adjustable DC Power Supply
- Features8: 30V 10A Adjustable DC Power Supply
- Features9: 60V 5A Adjustable DC Power Supply
- Features10: 120V 3A Adjustable DC Power Supply
Four-digit display 0.01 V/0.001 A
1.TPS305 with USB-A/TYPE-C Encoder adjustment dc power supply 30V 5A
2.TPS3010 with USB-A/TYPE-C Encoder adjustment dc power supply 30V 10A
3.TPS605 with USB-A/TYPE-C Encoder adjustment dc power supply 60V 5A
4.TPS1203 with USB-A/TYPE-C Encoder adjustment dc power supply 120V 3A
Applied scenes
2. Mobile phone repair,computer repair,monitor repair,electrical appliance maintenance,Car DVD, car audio.
3. Product aging, electroplating,such as resistors, capacitors, relays, DC motors, LEDs, etc.
4. Charge the battery.
5. Laboratory, scientific research teaching,school,factory,scientific research production lines,maintenance power supply.
6. All other occasions requiring DC power supply.
Q: Is it suitable for repairing mobile phones and laptops?
A: Yes.
Q: Can this power supply charge the battery of a 25v car?
A: You can charge a 25V battery, because the maximum voltage of the power supply can reach 30V (note! The power setting voltage must be greater than the battery voltage to charge, otherwise it will kick back the power supply and damage the power supply!)
Q: Can it be used for electroplating?
A: It can be electroplated.
1x Power cord (EU,US,UK,AU)
1x Test line
1x User manual




























![[Fast delivery] 3KW 1.8KW Hybrid Solar Inverter 12V 24V 220V Off-Grid Pure Sine Inverter with 80A MPPT Solar Charge Controller](https://thingcompare.com/wp-content/uploads/2026/03/kf-S7070bbedfaa447a29b01e50e7d474cb2s.webp)








m***o (verified owner) –
Fast delivery, good packaging and tested, perfect. The short circuit protection or maximum current works very well. I highly recommend.
f***r (verified owner) –
First-class power supply without weaknesses with a power consumption of 10A and useful features… Tested with audio and sensitive circuits in the photography department! My recommendation for electronics enthusiasts.
AliExpress Shopper (verified owner) –
Fast shipping. To perform countless tests with a variable power supply. With cables for testing. From the minimum to 30V 300 watts. Sufficient for numerous tests and electrical checks in various aspects. Also with output for mobile batteries, USB output. Well assembled, with a safety fan and robust. Highly recommended.
P***i (verified owner) –
Very fast delivery, ordered yesterday before noon, delivered today around noon. The power supply is very intuitive to use, supports CV and CC modes and has OCP, it works quickly and efficiently, perfect for home or hobby use. The only drawback is that the fan is quite loud, but fortunately it doesn’t turn on at low load; at higher load it turns on briefly to cool down, then works silently again until it heats up again.
M***a (verified owner) –
Highly satisfied with purchase! Tested indication – quite accurate. Didn’t put load, but during idle test of voltage and current – everything is ok.
Feels and looks quality made. There is a selector switch to select 110v or 220v. Definitely recommend if you need an adjustable power supply! 👍
Also nice thing, that you can choose from a few models and buy the one for your needs.
R***r (verified owner) –
Lab power supply with compact size, high performance, and user-friendly design
The device takes up only about due to its small dimensions. 14 cm x 8 cm x 21 cm (W x H x D), takes up very little space on the lab table and works perfectly. As is common nowadays, the adjustment of voltage and current is not done via a potentiometer but digitally through an encoder. You can select the step size by pressing the rotary knob. The default setting is a practical step size of 0.1 V. 10 mA, so that the decimal point setting can usually be omitted. A few seconds after the adjustment, the actual values are displayed instead of the set values.
The device acknowledges every operation with a somewhat piercing beep, which fortunately can be permanently disabled.
The device also functions electrically as intended, and the set values are adhered to very precisely.
J***o (verified owner) –
Fast shipping and very precise!
“received in portugal in just 2 days! I am very satisfied. I thought the unit would be much larger, but it is actually very compact and perfect for a crowded workbench. I tested the ocp function using a 24v bulb (2.5a consumption); i set the limit to 2.0a and the ocp worked perfectly, cutting the power immediately. Very accurate and reliable equipment. Great value for money!”
P***e (verified owner) –
Tests conducted with several voltmeters indicate a difference between 0.10 and 0.20 volts below the displayed value, and the difference in amperage is insignificant.
The voltage output activation button allows the values to be prepared with the connected system without the risk of potential overvoltage for it.