Garage Remote Replicator 433mhz Access Command Opener 433.92Mhz Electric Scroll Code Clone Access Control Fixed Code

Garage Remote Multiplier 433Mhz Door Command Switch 433 92MHz electric scroll code Clone access door holding key

Product parameter

Name :433Mhz copy remote control

Color: Black

ABS material:

Operating frequency :433Mhz

Number of keys :4

Code removal buttons :I and II

Battery type :CR2016

Use steps:

1. Clear the code: press the A and B keys with two fingers at the same time; The LED light flashes rapidly 3 times in about 2 seconds; Release one finger (the other hand cannot be released), then quickly click with the released finger to release the button 3 times until the LED light flashes rapidly; You can loosen two fingers; Then press any key on the remote control; When the LED light is off, it means that the code has been correctly deleted (the four keys are empty); If you press either remote, the light remains on after pressing the key, which indicates that the original code was not properly removed. It must be removed again, and the clone can only be successfully cloned if the code is correctly removed. You can duplicate and clone code.

2. Copy: the left hand holds the original remote control, the right hand holds the cloned remote control. Two remote controls as close together as possible; Press the first button on both remote controls simultaneously; After about 2 seconds, the LED flashes twice; After a second, the light is still flashing, release your finger; After learning successfully, press the button, the light is always on, indicating that the first key code on the original remote control has been copied to the other remote control; The same method can open the second rotation button, the third button… If the replication is successful, the remote control function is the same as the original paired remote control.

3. : When restore accidentally deleted backup password remote can press two buttons on the bottom of the body, while remote copy, quick parpadearaLED light, press any key, then, hold, which means the remote control code has been ignited. Recover. Before using duplicate remote controls, be sure to remove existing code from the remote control.

4. How to deal with the situation where some buttons can be controlled, but others cannot? You can use delete and restore operations as follows:

(1) First remove the code;

(2) After deleting the code, the key fails to be copied again, and the rest of the keys do not need to be copied;

(3) Then delete the code again;

(4) Recover the code; In this case, the unsuccessfully copied key will be overwritten by the new code, and the successfully copied key will be retained. If there is no copy key after the second copy key, the above steps are repeated until all keys have been successfully copied.