MH-300A Plastic Particle Density Measuring Instrument Rubber Water Absorption Rate Liquid Hydrometer Solid Densitometer

Description

MH-300A Plastic Particle Density Measuring Instrument Rubber Water Absorption Rate Liquid Hydrometer Solid Densitometer

Product parameters:

• Model: MH-300A

• Max Weighing Capacity: 300g

• Weighing Precision: 0.01g

• Density Precision: 0.001g/cm³

• Density Error: ±0.02g/cm³

• Test Types: Any solid material (excluding powders)The density can be greater than or less than 1

• Output Values: Density, Volume

• Instrument Dimensions: 195 × 220 × 190mm

Product Applications:

• This machine is primarily used in industries such as rubber, plastics, wires & cables, food, composite materials, cosmetics, footwear materials, glass, precious metals, metal recycling, and more.

• It can directly read the average weight in air, average weight in water, as well as the density value and volume of samples including solids, granules, films, floaters, and powders.

Installation Precautions:

1. Do not install the densitometer in dusty, windy, vibrating environments, or areas with significant temperature/air pressure fluctuations or magnetic fields.

2. Do not place the densitometer on an unstable surface, as this may affect its leveling.

3. Avoid locations with direct sunlight.

4. Keep away from heaters or air conditioners.

5. Do not use an unstable AC power source.

6. Avoid areas with flammable, explosive, or corrosive gases.

7. Before use, allow the balance to adjust to ambient temperature.

Product Maintenance:

1. The MH-300A must never measure objects exceeding 300g in weight. Furthermore, avoid subjecting the instrument to forces beyond its capacity during installation and operation.

2. Wipe the external surfaces of the instrument with a dry cloth to prevent dust accumulation.

3. If the instrument will not be used for an extended period, remove the water tank.

4. Protect the instrument from collision, crushing, and moisture. If it will not be used for a long time, disconnect the power supply and cover it properly with a dust cover.